| After-sales Service: | 10 Million Km |
|---|---|
| Warranty: | 10 Million Km |
| Function: | Cooling & Heating, Ventilating, Air Filtering |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier SAE J1402 standar diameter 3/8"1/2"5/8"Truck and bus air brake system high pressure PET reiforcemnet EPDM rubber air brke line brake hose assembly
Air brake is designed for compressed air brake systems on trucks and buses. This hose meets SAE J1402 specifications and DOT regulation FMVSS-106 (anyone making brake assemblies must register with DOT and ensure each assembly complies with FMVSS-106).
| Air Brake Hose Size List | ||||||||
| SN. | Inch | Specification MM |
I.D MM |
O.D MM |
Working Pressure Mpa |
Working Pressure Psi |
Burst Pressure Min.Mpa |
Burst Pressure Min. Psi |
| 3/8 | 10 x 17 | 10±0.30 | 17.0±0.40 | 15 | 2100 | 60.0 | 8700 | |
| 3/8 | 10 x 19 | 10±0.30 | 19.0±0.40 | 15 | 2100 | 60.0 | 8700 | |
| 1/2 | 13 x 22 | 13±0.30 | 22.0±0.50 | 15 | 2100 | 60.0 | 8700 | |
| 5/8 | 16 x 24 | 16±0.40 | 24.0±0.50 | 15 | 2100 | 60.0 | 8700 | |
•- Established in 1998 with a registered capital of 150,0000 dollar .
•-1998-2000 specifically supply hose for domestic, Market Share is more than 30%.
•- 2000-2004 started to export automotive brake hose.
•- 2005 started to products brake hose assembly and fittings.
Brake hose factory moved to Hebei Province
The hose factory located in Hebei was certificated ISO9001-2000
Bought welded steel pipe factory in Qingdao, and began to export steel pipe
We certificated the Ts16949 quality management system by SGS.
•-2006 Establish the second fitting factory
•-2019 get IATF16949 certificate and ISO9001:2015 certificate
•Employee: Head office:15 staff Brake hose assembly factory:60 staff
Hose factory: 80 staff Fitting factory: 60 staff
Steel pipe factory:30 staff
•Capacity: Brake hose assembly: 1 million pieces/year
Brake hose: 2 million meter/year
Fitting:2 million meter/year
Steel pipe: 200 ton per year
•Annual sales: 2020 about 6.2 million dollar
2021 about 7.5 million dollar
2022about 8 million dollar
Disc Brake Hydraulic Hose
Brake hydraulic hoses are the flexible hoses that connect the hard lines that run along the body or frame of your vehicle to the brake calipers. Brake hoses are unbique in the fact they are designed and sized properly to move with the suspension as it travels up and down over bumps in the road.
Since brake hoses carry hydraulic fluid as well as transfer pressure to the brake calipers/wheel cylinders it is critical to inspect these hoses regularly for any types of fraying or external cracks. Traditional rubber hoses tend to shrink over time internally restricting the flow of pressure to the brake calipers. Because of this FCP Euro recommends replacing brake hoses in matches pairs to ensure even braking performance at each corner of the axle.
To further improve the factory braking capabilities of the automotive, we created our Unplugged Performance Stainless Steel Sport Brake Line Set. For those who demand higher performance and better brake feel from their automotive, these brake lines are a must! By upgrading to the Stainless Steel Sport Brake Line Set, you'll notice a much firmer, much more responsive brake feel. The more-responsive, more-accurate feel will allow for more sensitive braking adjustments.Brake line connects hydraulic brake actuator to trailer brakes when used with additional lines, tees, and fittings (sold separately)
Q1: What kinds of main rubber hose can product?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}