China 30 Years Factory SAE J1532 Standard 5/16", 13/32", 1/2" Diameter Applicable Liquid Dexron (II -V) Transmission Oil Cooler Hose

Product Description

 

 

Product Description

The oil cooler hose circulates oil between the oil cooler and engine. This helps keep the engine from overheating. Over time, heat, chemicals, or age can cause the hose to wear out. If the oil cooler hose fails, you may experience oil leaking from the hose or a low oil warning light. It is important to inspect this hose at the first sign of a problem to avoid damage to your engine, as an engine running without oil will result in major damage and costly repairs.
The oil cooler hose is designed to last for nearly as long as the engine does. Over time, the heat that this hose is exposed to will usually start to wear it down. Most of the oil cooler hoses on the market are made from both rubber and metal. It is usually the rubber portion of the hose that will give out and make it necessary to get a new one.
The oil cooler hose circulates oil between the oil cooler and engine. This helps keep the engine from overheating. Over time, heat, chemicals, or age can cause the hose to wear out. If the oil cooler hose fails, you may experience oil leaking from the hose or a low oil warning light. It is important to inspect this hose at the first sign of a problem to avoid damage to your engine, as an engine running without oil will result in major damage and costly repairs.
The oil cooler hose is designed to last for nearly as long as the engine does. Over time, the heat that this hose is exposed to will usually start to wear it down. Most of the oil cooler hoses on the market are made from both rubber and metal. It is usually the rubber portion of the hose that will give out and make it necessary to get a new one.
 

Oil Cooler Hose Size List
SN.	Specification MM	I.D MM	O.D MM	Working Pressure Mpa	Working Pressure Psi	Burst Pressure Min.Mpa	Burst Pressure Min. Psi
	8.0 x 14.0	8.0±0.20	14.0±0.30	2.06	300	8.27	1200
	10.0 x 17.0	10.0±0.30	17.0±0.40	2.06	300	8.27	1200
	13.0 x 22.0	13.0±0.40	22.0±0.50	2.06	300	8.27	1200

Certifications

 

QDGY factory

•- Established in 1998 with a registered capital of  150,0000 dollar .
•-1998-2000 specifically supply hose for domestic, Market Share is more than 30%.
•- 2000-2004 started to export automotive brake hose.
•- 2005 started to products brake hose assembly and fittings.
         Brake hose factory moved to Hebei Province
         The hose factory located in Hebei was certificated ISO9001-2000
         Bought welded steel pipe factory in Qingdao, and began to export steel pipe
         We certificated the Ts16949 quality management system by SGS.
•-2006 Establish the second fitting factory
•-2019  get IATF16949 certificate and  ISO9001:2015 certificate
 
•Employee: Head office:15 staff                           Brake hose assembly factory:60 staff
                   Hose factory: 80 staff                        Fitting factory: 60 staff
                   Steel pipe factory:30 staff
•Capacity:  Brake hose assembly: 1 million pieces/year
                   Brake hose:  2 million meter/year
                   Fitting:2 million meter/year     
                   Steel pipe:  200 ton per year
•Annual sales:  2020 about 6.2 million dollar
                         2021  about 7.5  million dollar
                         2022about 8 million dollar
 

Related products

Disc Brake Hydraulic Hose
Brake hydraulic hoses are the flexible hoses that connect the hard lines that run along the body or frame of your vehicle to the brake calipers. Brake hoses are unbique in the fact they are designed and sized properly to move with the suspension as it travels up and down over bumps in the road.
Since brake hoses carry hydraulic fluid as well as transfer pressure to the brake calipers/wheel cylinders it is critical to inspect these hoses regularly for any types of fraying or external cracks. Traditional rubber hoses tend to shrink over time internally restricting the flow of pressure to the brake calipers. Because of this FCP Euro recommends replacing brake hoses in matches pairs to ensure even braking performance at each corner of the axle.

To further improve the factory braking capabilities of the automotive, we created our Unplugged Performance Stainless Steel Sport Brake Line Set. For those who demand higher performance and better brake feel from their automotive, these brake lines are a must! By upgrading to the Stainless Steel Sport Brake Line Set, you'll notice a much firmer, much more responsive brake feel. The more-responsive, more-accurate feel will allow for more sensitive braking adjustments.
Brake line connects hydraulic brake actuator to trailer brakes when used with additional lines, tees, and fittings (sold separately)
Flexible design makes hose perfect for use with foldaway trailer tongues, disc brakes, and torsion axles
Stainless steel flares resist corrosion and are stronger than brass to reduce splitting
Ideal for boat trailers
Deep threads improve connection to help prevent leaks
Rubber hose meets DOT and SAE standards
Fittings on both ends are durable and rust resistant
90-Degree male swivel flare nut is great for applications with limited clearance
Bend in fitting keeps you from having to bend hose
Swivel allows flare fitting to turn without the hose twisting
Female inverted flare (FIF) fitting easily threads onto a male fitting
Double-crimped ferrules securely clamp fittings to hose
Open area on fittings lets you use a line wrench for a better grip
Minimizes the risk of stripping threads

Packaging & Shipping

FAQ

 

Q1: What kinds of main rubber hose can product?
A: Rubber brake hose,EPDM brake hose,Hydraulic brake hose,Hydraulic hose,water hose,fuel& oil hose,Brake hose,Stem hose,SAE J1401 brake hose,DOT 1/8" brake hose,OE No. brake hose,Flexible brake hose,Performance competition brake hose...

Q2: What size of brake hose can you supply?
A: common size: 3.2x10.5mm(1/8");4.8x12.5mm(3/16")
   Special size: 3.2x11mm...or your request size

Q3: Can you print the words(line) as our requirement?
A: Yes,we do provide embossed and printing marking with different color ,as your requirement.

Q4: What kinds of fitting can product?
A: All kinds.Female fitting,male fitting,banjo fitting,adepter brake hose fitting,bolts and nuts,steel with zinc ,chrome,nickle...stainless steel,brass...

Q5: How many types of brake hose do you product?
A: Brake hose,Teflon braided brake hose,PTFE stainless steel braided brake line,Steel tube,Bundy tube,Steel tube assembly,Brake hose assembly, air brake hose, AC hose...

Q6: What is my order's delivery date?
A: It usually takes 5-40 days,which generally depends on your order quantity and our storage.Details information ,kindly please feel free to contact with us, we will reply you within 24 hours.

Q7.Are you a manufacturer or trading company?
We are a professional manufacturer and export by ourselves .