| Customization: | Available |
|---|---|
| After-sales Service: | 10 Million Km |
| Warranty: | 10 Million Km |
|
Still deciding? Get samples of US$ 25/Meter
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Air conditioning hose is used for automotive or domestic air conditioning system. It is a textile-reinforced rubber hose with a thick inner liner. It can be single braided with reinforcement layer of rayon or similar textile or it can be a two textile braided layers, separated from each other by a layer of bonded rubber compound. Both types have an outer cover, which is pricked to allow any refrigerant gas that has permeated through the reinforcement layer to escape without causing the hose to blister. It can also be made with a wire-reinforced with an inner liner, a wire reinforcement layer, and an outer layer of heat-resistant textile reinforcement.
Multilayers air conditioning tubing are made of innerlayer of EPDM/ CR/CSM , intermediate layer of NBR/EPDM and outer layer of EPDM. The three compounds were optimised for bonding, physical properties and cure characteristics.
| Hose diameter | ID X OD (mm) | Wall Thickness | Max Working pressure (Mpa) | Max Burst pressure (Mpa) | Min Bend Radius (mm) | Permeability kg/m2/year |
| 5/16" | 8.2x15.2 | 3.5 | 3.5 | 21 | 55 | 1.6 |
| 13/32" | 11.4x18.4 | 3.5 | 3.5 | 21 | 65 | 1.6 |
| 1/2" | 12.8x20.8 | 4 | 3.5 | 22 | 70 | 1.6 |
| 5/8" | 15.4x22.8 | 3.7 | 3.5 | 18 | 85 | 1.6 |
| 3/4" | 19.0x28.6 | 4.8 | 3.5 | 18 | 85 | 1.6 |
| 7/8" | 22.0x32.0 | 5 | 3.5 | 18 | 85 | 1.6 |
| 9/8" | 28.5x41 | 6.3 | 3.5 | 18 | 85 | 1.6 |
•- Established in 1998 with a registered capital of 150,0000 dollar .
•-1998-2000 specifically supply hose for domestic, Market Share is more than 30%.
•- 2000-2004 started to export automotive brake hose.
•- 2005 started to products brake hose assembly and fittings.
Brake hose factory moved to Hebei Province
The hose factory located in Hebei was certificated ISO9001-2000
Bought welded steel pipe factory in Qingdao, and began to export steel pipe
We certificated the Ts16949 quality management system by SGS.
•-2006 Establish the second fitting factory
•-2019 get IATF16949 certificate and ISO9001:2015 certificate
•Employee: Head office:15 staff Brake hose assembly factory:60 staff
Hose factory: 80 staff Fitting factory: 60 staff
Steel pipe factory:30 staff
•Capacity: Brake hose assembly: 1 million pieces/year
Brake hose: 2 million meter/year
Fitting:2 million meter/year
Steel pipe: 200 ton per year
•Annual sales: 2020 about 6.2 million dollar
2021 about 7.5 million dollar
2022about 8 million dollar
Disc Brake Hydraulic Hose
Brake hydraulic hoses are the flexible hoses that connect the hard lines that run along the body or frame of your vehicle to the brake calipers. Brake hoses are unbique in the fact they are designed and sized properly to move with the suspension as it travels up and down over bumps in the road.
Since brake hoses carry hydraulic fluid as well as transfer pressure to the brake calipers/wheel cylinders it is critical to inspect these hoses regularly for any types of fraying or external cracks. Traditional rubber hoses tend to shrink over time internally restricting the flow of pressure to the brake calipers. Because of this FCP Euro recommends replacing brake hoses in matches pairs to ensure even braking performance at each corner of the axle.
To further improve the factory braking capabilities of the automotive, we created our Unplugged Performance Stainless Steel Sport Brake Line Set. For those who demand higher performance and better brake feel from their automotive, these brake lines are a must! By upgrading to the Stainless Steel Sport Brake Line Set, you'll notice a much firmer, much more responsive brake feel. The more-responsive, more-accurate feel will allow for more sensitive braking adjustments.Brake line connects hydraulic brake actuator to trailer brakes when used with additional lines, tees, and fittings (sold separately)
Q1: What kinds of main rubber hose can product?
){kind=link}